STUDS
   

Product Name :

Ice-Stud

Product Code :

S8

Usage :

Stud made out of steel with hardened body (10x10 or 12x12 mm) and welded tungsten carbide insert. The total length is 13 mm and the thread variations 5/16" and 3/8". The thread length is 6 mm. This stud has been designed for riding, driving and jumping on variable surfaces when the demand for traction is less and and a mild application is advisable for the horse.

   

Product Name :

Jump-Stud

Product Code :

S9

Usage :

Stud made out of steel with hardened body (12x12 mm) and welded carbide insert. The total length is 27 mm and the thread 3/8". This stud is designed for jumping on a variety of surfaces.

   

Product Name :

Drive in Stud (Plug)

Product Code :

S10

Usage :

Drive in stud made out of steel with hardened body (diametre 14 mm and hight 7 mm) and welded tungsten carbide insert. This stud is easy to apply. Drill a hole in the shoe with a 9,1mm drill bit. Place the stud on top of the hole and drive it down with a softened hammer. Leave a gap of about 1 mm between the stud head and the shoe preventing the stud to come loose. The stud can be reused by tapping it loose and applying it again as previously described. This stud is designed to be used on hard surfaces or when the demand for grip is less. The design prevents injuries from kicking and stepping and can normally be used permanently.

   

Product Name :

Drive in Stud (Plug)

Product Code :

S11

Usage :

Drive in stud made out of steel with hardened body (diametre 14 mm and hight 5,5 mm) and welded tungsten carbide insert. This stud is easy to apply. Drill a hole in the shoe with a 6,7mm drill bit. Place the stud on top of the hole and drive it down with a softened hammer. Leave a gap of about 1 mm between the stud head and the shoe preventing the stud to come loose. The stud can be reused by tapping it loose and applying it again as previously described. This stud is designed to be used on hard surfaces or when the demand for grip is less. The design prevents injuries from kicking and stepping and can normally be used permanently.

   

Product Name :

Drive in Stud (Plug)

Product Code :

S12

Usage :

Drive in stud made out of steel with hardened body (diametre 10 mm and hight 5,5 mm) and welded tungsten carbide insert. This stud is easy to apply. Drill a hole in the shoe with a 6,7 mm drill bit. Place the stud on top of the hole and drive it down with a softened hammer.Leave a gap of about 1 mm between the stud head and the shoe preventing the stud to come loose. The stud can be reused by tapping it loose and applying it again as previously described. This stud is designed to be used on hard surfaces or when the demand for grip is less. The sesign prevents injuries from kicking and

   

Product Name :

Drive in Plug for reinforcement

Product Code :

S13

Usage :

Drive in stud made out of steel with hardened body (diametre 9,8/8,8mm oand hight 11 mm) and welded tungsten carbide insert. This stud is easy to apply. Drill a hole in the shoe with a 9,1 mm drill bit. Place the stud on top of the hole and drive it down with a softened hammer. The stud can be driven down in line with the shoe or or to a suitable hight depending on the need of traction. The stud can be reused by tapping it loose and applying it again as previously described. This stud is suitable for protection when the shoe wear is excessive or when light traction is prefered. Normally two studs are placed in the toe and one in each heel.

   

Product Name :

Drive in Plug for reinforcement

Product Code :

S14

Usage :

Drive in stud made out of steel with hardened body (diametre 7,4/6,8mm and hight 9 mm) and welded tungsten carbide insert. This stud is easy to apply. Drill a hole in the shoe with a 6,7 mm drill bit. Place the stud on top of the hole and drive it down with a softened hammer. The stud can be driven down in line with the shoe or or to a suitable hight depending on the need of traction. The stud can be reused by tapping it loose and applying it again as previously described. This stud is suitable for protection when the shoe wear is excessive or when light traction is prefered. Normally two studs are placed in the toe and one in each heel.

   
 

<<<<<<       BACK 

 

       Copyright. Arry International. All rights reserved    Best view 800 x  600      website powered by :: www.kingitsolution.com